Features of Allergic Harvest PC

The thickness of this material is 4 mm.

If you would like, you are able to increase the length of the construction to 6 yards or longer. To do this, it is enough to join a two-meter extension. When selecting a drawing, look closely at the distance between the arches. This figure should be 65 cm, and that’s the most appropriate duration for the specified depth of the substance. The width of the doors based on the manufacturer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, it is necessary to choose a location for its location. If that is done correctly, it is possible to provide yourself with a crop of fresh veggies for the entire year.

The location for the future greenhouse is marked immediately at the planning of this garden plot. To be able to melt the snow at the location of their greenhouse as early as possible, the very best point on the site will be a slight elevation. Moreover, in this place will not need to be concerned about large humidity as dirt and atmosphere inside the construction.

Build a polycarbonate greenhouse on an elevated site – means to take care of the best temperature inside.

If it is not feasible to place a greenhouse in an elevated place, you will need to pour a coating of fine shattered rock around 20 cm and the same layer of fertile land to create seedbeds.

Before building a greenhouse on your backyard plot, it’s also wise to consider where and how this structure will be set up. To begin with, you have to pick a place for this. The greenhouse ought to be located at a metropolitan region at least a couple meters away from houses, barns and other structures.

The best way to Put in a greenhouse according to the Faces of the Planet

Be sure to level the soil surface – it’s best to remove the surface. This can also get rid of weed seeds. And for ease of work, eliminate the dirt in a place that is about a meter wider on all sides of the rectangle you want.

In addition, it is worth considering using a foundation. As producers state, now most greenhouses don’t need that, especially if they (greenhouses) are used just in the spring and summer period. But, experienced gardeners still suggest earning a basic foundation from a bar. It is very simple – it’s sufficient to link with each other utilizing metal corners and screws four pieces of wood using a cross-section of 10 * 10 cm. The size of such a foundation should be equal to the base of their future greenhouse.

Simple bar base

You could also create a strip foundation of concrete. He is more dependable than a bar base, but demands more financial and labor costs. By the way, the greenhouse, which is used in winter, without it and don’t do without it whatsoever.

Stages of the creation of a strip foundation: a schematic representation

Many manufacturers counsel to set up greenhouse structures without creating a base. For this use, they equip the frame with special T-shaped legs, so that the construction was securely fixed. However, as practice shows, it is still vital to construct a foundation: so and the basis will be more rigorously fixed and also the elements of the foundation in touch with the ground, will be kept much more in its initial condition.

The major thing is to care for the material with gidpostroy.ru special agents to protect the timber from moisture. The material is normally installed on concrete cubes that are dug into the ground. For a six-meter structure, they want 10 bits: four to either side and one in the center of the ends.

Before you perform the greenhouse , you have to pick the ideal place for it. It must be an even website, so that the frame was located evenly, without distortions. It needs to be sunny and not obscured by buildings or trees.